** All Orders Over $150.00 Include Fed Ex Ground Shipping to a Street Address in the USA **

** Fishing Rod Orders Require A Surcharge of $15.00 **

Shimano

Shimano Saragosa SW
Shimano Saragosa SW
  • Manufactured by: Shimano

Price:   Starting at: $269.99

Add to Cart:         

Please Choose:



Model Line Retrieve per Crank (in.) Line Capacity (# Test / Yards) Power Pro Line Capacity (# Test/Yards) Max Drag (lbs.) S A-RB Ball Bearings Roller Bearings Gear Ratio Weight (oz)
SRG5000SW 38 10/240, 12/195, 14/165 20/255,30/230,40/185 22 5 1 5.7:1 16.0
SRG6000SW 40 12/265, 16/170, 20/120 30/245,50/210,65/180 22 5 1 5.7:1 16.4
SRG8000SW 42 14/270, 16/220, 20/160 40/300,50/295,65/185 27 5 1 5.6:1 24.3
SRG10000SW 40 14/370, 16/300, 20/220 50/360, 65/290, 80/215 33 5 1 4.9:1 24.3
SRG20000SW 41 20/380, 25/310, 30/250 65/525, 80/445, 100/305 44 6 1 4.4:1 33.3
SRG25000SW 45 20/570, 25/49, 30/360 65/630, 80/520, 100/440 44 6 1 4.4:1 34.2


One of our latest additions to the Offshore Spinning line up dedicated to the Blue Water angler. Saragosa SW features Propulsion Line Management System, Paladin Gearing, Waterproof drag and Shielded A-RB bearings. Tackle the toughest species and conditions with elegance and power. Up to 44 pounds of drag to stop even the meanest offshore fish.

FEATURES
  • * X-Ship
  • * X-Drag
  • * X-Shield
  • * X-Protect
  • * Twin Drag - All Sizes
  • * Paladin Gear Durability Enhancement
  • * Propulsion Line Management System
  • * S A-RB Shielded Ball Bearings
  • * Stopperless Design (No Anti-Reverse Switch)
  • * Aluminum Frame
  • * Graphite Rotor
  • * Power Roller III Line Roller
  • * S-Arm Cam
  • * One-Piece Bail Wire
  • * Super Stopper II Anti-Reverse
  • * 5+1 Bearings (6+1 on 20000 & 25000 sizes)
  • * Direct Drive Mechanism
  • * Machined Aluminum Handle Shank
  • * Dyna-Balance
  • * Fluidrive II
  • * Cold Forged Aluminum Spool
  • * Waterproof Drag
  • * Dartainium II Drag Washers
  • * Ergonomic Handle Grips
  • * Septon Handle Grips
  • * Repairable Clicker
  • * Approved for use in Saltwater
  • * Rated for use with Mono, Fluorocarbon and PowerPro lines

Fluidrive II
Building upon the successes of Fluidrive, which provides extremely tight tolerances and control in the cutting process, Fluidrive II polishes the gear surface to maximize tooth contact. This increases the efficiency of the retrieve for more power with less effort.

S A-RB Bearings
These bearings have been through the same process as our A-RB bearings, but feature shields on both sides of the bearings that reduce the possibility of salt or sand inhibiting the bearing's rotation.

Dyna-Balance
This feature eliminates wobble during the retrieve by counter balancing the rotor to enhance sensitivity and smoothness. By using computer balancing, an approach similar to car tire balancing, we are able to redistribute the rotor weight to create smooth rotation and eliminate vibrations caused by the reel.

Paladin Gear Durability Enhancement
Paladin Gear Durability Enhancement Spinning Using a special cold forged aluminum drive gear and a hardened brass pinion gear (Stainless Steel pinion gear on Stella SW), reels equipped with the Paladin Gear Durability Enhancement will retain their out-of-the-box smoothness much longer than before. In fact, testing has shown that this combination of metals is more durable than an all-stainless steel drivetrain while maintaining the smoothness that Shimano is famous for.

Propulsion Line Management System
The most obvious component of the Propulsion Line Management System is the new Propulsion spool lip design. Through tens of thousands of casting tests and computer simulations it has been determined that this new spool lip design provides longer casting distances than a standard spool lip design while preventing backlashes and wind knots from forming. It also allows the line to flow off of the spool in smaller loops during the cast which means less slap on the stripper guide. This means longer casts with less friction. The Propulsion spool also utilizes a long stroke design to further enhance the casting distance. Furthermore, there is less bouncing of the line on the spool lip like on a standard spinning spool. Because of the unique shape of the Propulsion spool, the line flows consistently off of the spool. So, with a standard spool, friction alternates from heavy to light as the line slaps the spool lip. This causes backlash and inconsistent line speeds. The Propulsion spool lip provides consistently light friction to overcome these situations.

Cold Forged Aluminum Spool
These spools provide increased strength and durability over diecast aluminum or graphite spools.

Power Roller II
This is an oversized line roller that reduces twist from casting and retrieving and is enhanced with a tapered area on the support to help line get onto the roller quicker.

Super Stopper II
Super Stopper II anti-reverse uses a one-way bearing that eliminates backplay.This provides the angler with instant hooksetting power. In some reels, the Super Stopper II can be turned off to allow backreeling for special techniques and situations.