Okuma

Features:

• * Open spool bearings with TSI-301 oil. Increases freespool 2-1/2 times.
• * All non-spool bearings feature full grease pack for maximum longevity.
• * SE reels will feature a yellowfin tuna etched into the side plate.
• * Frames have been machined out for increased clearance between spool and cross bars.
• * MK-8/10/15 will feature MK-20 size handle knobs.
• * MK-20/30 features the MK-50 handle arm and knobs
• * New lower speed 1.3:1 gear ratio featured in 20/30 sizes.
• * 6061-T6 Machined aluminum frame with forged side plates
• * 17-4 stainless steel gearing
• * Helical cut gears for increased torque, smoothness and improved gear meshing
• * Makaira reels all feature two-speed gearing systems
• * Cold forged, Type-II anodized, machined aluminum spool
• * CRC: Corrosion-Resistant Coating process
• * Patented spool pin system for use with braided or mono lines
• * Carbonite Dual Force Drag system featuring Cal’s universal drag grease
• * Custom designed thrust bearing: Alleviates side load on heavy drag settings
• * 4-pcs ABEC-5 precision Sapporo stainless steel ball bearings
• * Double dog, proprietary silent anti-reverse system
• * Ratcheting drag lever and drag cam for precise drag setting
• * Patented T-Bar handle with Easy Roll graphite insert on all models
• * Heavy duty stainless steel ratcheting clicker system
• * Heavy duty, 17-4 grade stainless steel drive and spool shafts
• * Type-II anodized frame, side plates, spool, drag lever and handle
• * Open top frame design on MK-5II, 10II, 15II, 20II, 30II
• * Lug and plug system on all open top reel models
• * Machined thumb rest on rear cross bar for improved ergonomics
• * Forged aluminum, full hard anodized reel foot and reel clamp
• * Precision placement of drain holes maximizes water removal from reel
• * Special screw ports around side plate screws reduces water/corrosion buildup
• * Makaira lever drag reels are backed by a 5-year warranty

Dual Force Drag
DFD incorporates both surfaces of the spool to maximize high-end drag pressure, efficiency and overall smoothness. Mounted in the top of the spool and protected by the Hydro Block system is a multi-disc felt drag system that works in conjunction with a secondary drag system that is mounted under the spool. Even pressure is applied to both surfaces of the spool for maximum stability.

Carbonite
Okuma's all-new "Carbonite" drag system features a newly-developed carbon-based drag material which displaces heat and friction consistently and steadily even under the harshest of fishing conditions. Used in conjunction with a small amount of specially-formulated Okuma drag grease, the Carbonite drag system allows for a much wider and smoother drag range, all while maintaining exceptional performance and pure fish-stopping power.

Machined Rigid Frame
Okuma's Machined Rigid Frame construction incorporates a one-piece fully-machined aluminum frame. These rigid bar-stock aluminum frames are the ultimate in precision alignment and tolerances withstanding more pressure and torque than any other material used in our industry for frame materials. Okuma features these anodized frames on fly reels, baitcast reels, lever drag reels and star drag trolling reels.

2-Speed Gearing
Okuma's 2-speed technology incorporates two sets of stainless steel main and pinion gears, allowing anglers the option of a high-speed gear ratio or a powerful low-speed gear ratio for maximum power and torque. To shift gears it is as easy as pushing a button or popping a lever with Okuma's unique shifting design to obtain the appropriate gear ratio you desire.

T-Bar
T-Bar Handle: The patented design of the T-Bar handle offers a true ergonomically correct angle to ensure an angler gets maximum power with minimum fatigue. The T-bar takes full advantage of the natural dynamics of the human hand, wrist and forearm to help sustain power and endurance for the angler.

Model	Gear Ratio	Bearings	Weight (oz.)	Line Retrieve	Monofilament line capacity diameter (in mm.)	Max Drag @ Strike w/ Freespool	Max Drag @ Full w/ Freespool	Frame Style / Frame	Sideplates	Spool
MK-10IISEa (Silver)	4.7:1 & 2.1:1	4BB + 1TB	26.1	33.5 & 15.0	460/15 (0.37), 380/20 (0.42), 280/25 (0.48)	27-lbs	34-lbs	Topless / AL	AL	AL
MK-15TIISEa (Silver)	4.7:1 & 2.1:1	4BB + 1TB	26.8	33.5 & 15.0	550/20, 410/25, 310/30	27-lbs	34-lbs	Topless / AL	AL	AL
MK-16IISEa (Silver)	4.3:1 & 1.3:1	4BB + 1TB	40	39.2 & 11.8	870/20 (0.42), 650/25 (0.48), 500/30 (0.55)	34-lbs	48-lbs	Topless / AL	AL	AL
MK-20IISEa (Silver)	3.8:1 & 1.3:1	4BB + 1TB	45.8	39.4 & 13.2	870/25 (0.48), 660/30 (0.55), 530/40 (0.60)	37-lbs	55-lbs	Topless / AL	AL	AL
MK-30IISEa (Silver)	3.8:1 & 1.3:1	4BB + 1TB	48	39.4 & 13.2	850/30 (0.55), 700/40 (0.60), 550/50 (0.70)	37-lbs	55-lbs	Topless / AL	AL	AL
MK-50IISEa (Silver)	3.2:1 & 1:1	4BB + 1TB	60.2	37.8 & 11.9	1000/30 (0.55), 650/50 (0.70), 400/80 (0.90)	60-lbs	85-lbs	Topless / AL	AL	AL
MK-50WIISEa (Silver)	3.2:1 & 1:1	4BB + 1TB	65	37.8 & 15.3	900/50, 780/60, 560/80	60-lbs	85-lbs	Crossbar / AL	AL	AL
MK-80WIISEa (Silver)	3.1:1 & 1.2:1	6BB + 1TB	116	45.7 & 20.6	1000/80 (0.90), 850/100 (1.0), 660/130 (1.12)	70-lbs	100-lbs	Crossbar / AL	AL	AL
MK-130IISEa (Silver)	2.2:1 & 1.2:1	6BB + 1TB	167	39.7 & 21.7	1570/80, 1270/100, 1000/130	75-lbs	100-lbs	Crossbar / AL	AL	AL

WARNING